STUDIO NOTES

 May 5

    Hope to pour the concrete bases for

SWINGING JENNY (STAINLESS PIPE) RED AND YELLOW

need plastic, poly,  blue tape or combo on feet to keep clean from black concrete

need to drill holes so threaded rods can go below plywood  to get proper thickness of concrete

mold modeling clay on threaded rods to make wiggle room for rods and space for washer and nut on bottom of base.

STAINLESS FISHERMAN

need to lower down to 1 3/4" or 2" base thickness.

mold modeling clay on threaded rods to make wiggle room for rods and space for washer and nut on bottom of base.

need plastic, poly,  blue tape or combo on feet to keep clean from black concrete

BLUE BRONZE FISHERMAN

need plastic, poly,  blue tape or combo on feet to keep clean from black concrete

 I think I may have used locktite on the threaded rods. 

Embedded nuts are Thai 1/2" (can use M14 nuts)

need to drill holes so threaded rods can go below plywood  to get proper thickness of concrete

mold modeling clay on threaded rods to make wiggle room for rods and space for washer and nut on bottom of base.

Looks like it will pour rain this afternoon when Tom is here to help.  Could use umbrellas or move bases and sculptures inside.  I think inside is a better idea.  Then easier to fishes the bases as they set up since have lights and warmth inside.